Troubleshooting - Philips AZB200 User Manual

Cd soundmachine
Table of Contents

Advertisement

8 Troubleshooting

Warning
Never remove the casing of this device.
To keep the warranty valid, never try to
repair the system yourself.
If you encounter problems when using
this device, check the following points
before requesting service. If the problem
remains unsolved, go to the Philips Web
page (www.philips.com/support). When
you contact Philips, make sure that the
device is nearby and the model number
and serial number are available.
No power
Make sure that the AC power cord
of the device is connected properly.
Make sure that there is power at the
AC outlet.
Insert the batteries with their
polarities (+/– signs) aligned as
indicated.
Replace the batteries.
No sound
Adjust the volume.
No response from the unit
Disconnect and reconnect the AC
power plug, then turn on the unit
again.
As a power-saving feature, the
system switches off automatically
15 minutes after track play reaches
the end and no control is operated.
No disc detected
Insert a disc.
Check if the disc is inserted upside
down.
Wait until the moisture
condensation at the lens has
cleared.
Replace or clean the disc.
12
EN
Use a finalized CD or correct format
disc.
Poor radio reception
Increase the distance between the
unit and your TV or other radiation
sources.
Fully extend the radio antenna.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Azb200/12

Table of Contents