Table of Contents
Advertisement
Step 6 : Remove the Main P.C.B. and LCD P.C.B.
Caution : Ensure the Battery Terminal + is release from the groove when removing the Main P.C.B.
Step 7 : Connect the Speaker Unit Wire to connector P301 on Main P.C.B.
Step 8 : Connect the DC Power supply device to the battery terminal for the power supply.
Step 9 : Checking and reparing LCD P.C.B. and Main P.C.B.
Note : Refer to Troubleshooting Guide of item 7 for composition check.
38
Advertisement
Table of Contents
