Advertisement
Available languages
Available languages
Before Mounting
Avoid placing a camera and the monitor system in the same
room to avoid acoustic feedback.
Pairing the Camera(s) with the Monitor Unit
Before the system can be used, the cameras must be paired with
the monitor unit. Up to four cameras can be operated in this way.
It is advisable to pair the cameras before they are finally installed
because you still have all components at hand. Attach the
antennas to the sockets on the backs of the cameras. The
antennas are simply screwed into the sockets.
1. Connect the monitor unit to the power mains with the included
power mains adaptor and turn it on with the ON/OFF switch.
Turn down the volume.
2. Press the "Menu" button on the monitor unit.
3. Use the direction keys to navigate to the "Settings" icon
the menu and confirm with the OK button.
4. Select the line "Pair" in the following menu with the UP and
DOWN buttons and confirm with the OK button.
5. Connect the camera(s) to a wall socket. When a camera is
connected, the red LED light up. Select a Camera with the UP
and DOWN buttons and press OK, then press the pairing
button which is located under the inscription „PAIRING" on the
connector of the respective camera. The camera will now be
paired with the monitor unit under the selected number.
During the pairing process the green LED flashes, when the
pairing process is complete, the LED turns on permanently.
6. Repeat the process for each connected camera.
7. To return to the previous menu, select the line "Exit" and
press OK.
Operation
5
Advertisement
