Electrolux BEAM Alliance Solaire Manual page 4

1. Cogged Belt – The cogged belt is designed for positive drive, and it will not stretch or slip.
The long life of the sturdy cogged belt also reduces the need for frequent replacement to
enhance cleaning efficiently.
2. LED Lamp – The super bright light of the LED (Light
Emitting Diode) lamp allows for better vision in poorly lit
areas for more thorough cleaning. It is also much more
durable than incandescent or halogen bulbs.
3. Automatic Carpet Height Adjustment – The Powerbrush
is equipped with two small roller wheels at the front which
keep the Powerbrush at the correct distance from the
carpet for optimal cleaning.
4. Circuit Breaker – The electronic circuit breaker protects the
motor and the cogged belt from damage should a motor
stall occur due to accidental pick up of a larger object.
The LED light located on the back of the powerbrush (see
Figure 2.) will glow green in color for normal operation and
fl ashing red in color for a stalled or jammed condition.
CAUTION! TO REDUCE THE RISK OF INJURY, BRUSHROLL COULD SUDDENLY
RESTART, UNPLUG BEFORE SERVICING.
When brushroll jam has been cleared, circuit breaker can be reset by switching hose handle
switch "off" then "on" . Your Powerbrush must be serviced by an authorized service center if it
continues to trip the circuit breaker.
5. Isolated Brush Compartment – The electrical compartment is totally separated from the
sweeping area. This providesuser safety and shields the electric motor from dust and dirt to
enhance motor life.
6. Dual Ball Bearing Brush Roller – The
rotating brush mechanism utilizes
precision ball bearings for extra smooth
running and durability.
7. Chevron Brushroll – Pulls dirt to main
airchannel.
8. Wheel Bearings - The rear wheels are
equipped with sealed ball bearings
providing a quiet long lasting assembly.
4
POWERBRUSH FEATURES
Powerbrush Wiring Diagram
Figure 2