T+A POWER BAR 2+3 Operating Instructions Manual page 9

Welcome.
We are delighted that you have decided to purchase a  product. Your new POWER BAR is
mains distribution panel, which incorporates filters and other protective circuitry specially de-
signed to optimise the sound of high-quality Hi-Fi components.
The POWER BAR absorbs interference borne on the mains supply and thereby prevents it
reaching the system. It also prevents any interaction between the individual system components,
and effectively eliminates interference caused by stray earth and shield currents.
Severe voltage peaks and surges often occur in thunderstorms and when equipment is switched
on and off. The distribution panel is also fitted with a voltage surge protection system which
reduces these peaks, and thereby helps to avoid potentially terminal damage to the highly
sensitive Hi-Fi electronics connected to it.
We are grateful for the faith you have shown in our company in purchasing this product, and
hope you enjoy many hours of undisturbed listening pleasure provided by your POWER BAR
mains distribution panel.

elektroakustik GmbH & Co KG

All the components we use meet the European safety norms and standards which are
currently valid. The operation instructions are for your own good - please read them
carefully and observe them at all times.

The POWER BAR is exclusively designed for the supply of audio devices. Please do
not connect any other devices. Make sure that the connected devices do not exceed
the maximum power handling capacity (see technical data) of the POWER BAR.
9
POWER BAR 2+5
POWER BAR 2+3