Rear Panel Features; General Specifications - VHT Valvulator GP3 Preliminary Owners Manual

REAR PANEL FEATURES

AUX OUT - Low impedance unity-gain guitar level output. Use for tuners, amplifiers or
additional preamps. -20dB (standard ¼" phone jack).
AUX INPUT - Rear panel guitar input. Front panel Input defeats this jack. Use for connecting
wireless or patch panel guitar signal in a rack system (standard ¼" phone jack).
F/X SEND - Low level pre-gain, pre-EQ output for pedals and routing to other amplifiers,
preamps, switchers and accessories. -20dB (standard ¼" phone jack).
F/X RETURN - Low level input for effects return, input from guitar, patch panel or from
wireless receiver output if pedal loop is not required. -20dB (standard ¼" phone jack). Use the
global F/X key on the front panel, MIDI or rear panel F/X switching jack to activate this function.
RECORDING OUT - Unbalanced, low impedance, frequency compensated cabinet simulator
output for recording direct to console or to send cabinet simulator signal to "front of house".
AMP OUT - Unbalanced, full range low impedance output for use in live performance or
recording through a power amp and speakers.
BALANCED OUT SELECT - Patch AMP OUT or REC OUT signal to the XLR output.
BALANCED OUTPUT - Balanced, low impedance output for recording direct to console or live
performance direct to front of house, monitor mix or in-ear monitor.
REMOTE 1 – Relay controlled switching jack for remote control of external amps, preamps and
effects. Assignable to CLEAN channel function and can be configured for "normally open" or
"normally closed" operation (stereo ¼" phone jack, ring, tip, sleeve). This jack is independently
isolated from system ground.
REMOTE 2 – Relay controlled switching jack for remote control of external amps, preamps and
effects. Assignable to RHYTHM or LEAD channel function and can be configured for "normally
open" or "normally closed" operation (stereo ¼" phone jack, ring, tip, sleeve). This jack is
independently isolated from system ground.
BRITE/EDGE - Remote switching jack for activation of BRITE on CLEAN channel, EDGE on
RHYTHM or LEAD channel (standard ¼" phone jack).
BOOST - Remote switching jack for activation of BOOST mode (standard ¼" phone jack).
SHIFT - Remote switching jack for activation of FAT mode (standard ¼" phone jack).
LOOP - Remote switching jack for activation of F/X LOOP (standard ¼" phone jack).
EQUALIZER - Remote switching jack for activation of Graphic EQ (standard ¼" phone jack).
RHYTHM/LEAD - Remote switching jack for activation of Lead and Rhythm channel (standard
¼" stereo phone jack). RHYTHM = Ring to ground, LEAD = Tip to ground.
OMNI/SELECT - Set to receive MIDI information on all MIDI channels, or selected channel.
MIDI CHANNEL SELECT - In SELECT mode above, select desired MIDI channel.
MIDI THRU - Standard MIDI controller thru.
MIDI OUT - Standard MIDI controller output.
MIDI IN/FOOTSWITCH - Standard MIDI controller input. Optional footswitch control of all
MIDI functions.
PHANTOM POWER IN - In a rack system you will connect your MIDI controllers AC adapter
here to send power to the controller via the MIDI cable. Check your MIDI controllers instruction
manual to confirm that this feature is available on your unit.
POWER – On/Off switch. Rear panel mounted for low noise operation.
MAINS – 117VAC, 50-60Hz, 38Watts.

GENERAL SPECIFICATIONS

TUBE COMPLEMENT: 3-12AX7WB (V1, V2, V5), 3 12AX7AC (V3, V4, V6).
SIZE: 19"W X 3-1/2" H X 9" D.
WEIGHT: 15 pounds.