04
RADIO
MANUAL STATION PRESETTING
You can preset up to six stations on each waveband.
Presetting a new station replaces the previous station.
1
Press one of the six buttons "1" to "6" until an
audible signal is heard.
The sound cuts out then becomes audible again
when the station has been preset.
The number of the button and the associated radio
frequency appear on the screen.
To recall the pre-set stored setting, press the button and release it
within two seconds.
292
AUTOMATIC STATION PRESETTING
Stations can only be preset automatically on wavebands FM3,
MW and LW.
Presetting new stations replaces the previous stations.
This presetting can be activated automatically irrespective of
the waveband selected.
1
Press the "AM/FM" button for more
than two seconds.
The six stations offering the best
reception are preset and classifi ed
from the weakest to the strongest on
the six corresponding buttons.
RECALLING PRESET STATIONS
1
Press one of the six buttons "1" to "6". The station
corresponding to the waveband selected appears on
the screen.
Disconnecting the battery terminals clears the preset radio
stations.