Exchanging The Batteries - SmartLab Move Quick Start Instruction

Push the thin end of the cord through the two tiny eyes at the back
side of the device (pict 2). Pushing together the cord a little bit makes
it easier to squeeze it through them (pic. 3). After that, push the
thicker end of the cord through the loop on the thin end and pull it
tight (pic. 4).
pict 4
pict 2
pict 3

3. Exchanging the Batteries

To exchange the batterie you need to open the battery lid with a coin
in direction of the arrow (pict 5). Remove the battery carefully and
insert the new battery into the battery lid with the plus side to the lid.
Then close the lid by using the coin again.
9