Specifications and Power Requirements
Specifications
Drivers (satellites)
One 2 inch full-range per satellite
Drivers (subwoofer)
System Freq. Response
Satellite Power
Subwoofer Power
Input Impedance
20K Ohms
Signal-to-Noise Ratio
> 93 dB
Fuse Type
0.25 AMP 250V
Crossover Frequencies:
Subwoofer
Satellites with subwoofer
Satellites without subwoofer 100 Hz
One 4 inch long throw woofer and
one 5.25 inch passive radiator
47 Hz - 18 kHz @ -10dB
60 Hz - 17 kHz @ -3 dB
7 Watts RMS per channel at < 10 %THD
5 Watts RMS per channel at < 1 %THD
15 Watts RMS at < 10%THD
12 Watts RMS at < 1 %THD
"Slow Blow" (5x20mm size)
250 Hz Linkwitz-Riley
200 Hz
Power Requirements
USA/CANADA Model
120 Volts / 60 Hz AC
MAX Power Consumption
UL and cUL Approved
30 Watts
Page 10