Cetacea Sound PAS I Quick Start Manual page 2

QUICK START GUIDE
Presentation Audio System I
Model No. "PAS I and SW I"
IMPORTANT SET UP INSTRUCTIONS
Speakers with Subwoofer:
1. Now that the speakers are working properly, (see other
side), turn off the music and disconnect the power adapter from the
base of the volume control knob. This power adapter is not used
with the PAS-I subwoofer.
2. Plug the subwoofer power cord into a 110v power source.
3. Take the subwoofer interconnect cord out of its package
and attach both wires to both the front of the subwoofer and the
base of the volume control knob. (The wires only fit one way.)
4. Be sure to disconnect the speaker power adapter first.
5. The interconnect cord cannot be connected incorrectly to
either the speaker volume control knob or the front of the
subwoofer. Just plug in the two connectors securely where they fit.
6. Adjust volume control on front of subwoofer to 12 o'clock.
7. Turn on the music again and adjust subwoofer volume to a
pleasant listening level.
8. Satisfy yourself that the system is working properly.
9. Re-read your owner manual and the complete set-up
instructions that come with it to obtain maximum use and
enjoyment from this exciting new audio system
If you have difficulties, re-read your owner manual thoroughly
and/or
Call Technical Support at 800-556-1922
.
Have your purchase receipt handy.
5PASI-AVD-RMF.doc
www.cetaceasound.com