Kompernass KH 5010 Operating Instructions Manual page 41

2. Insert a 9V block battery into the battery compartment.
Pay heed to the correct polarity. To make battery ex-
changes easier, ensure that the black textile strip is located
underneath the battery.
3. Close the battery compartment. The battery compartment
lid 7 must audibly engage.
Note:
In the event of weak batteries, the Operation LED 4 on the
device blinks when the receiver is on the cradle. In this case,
renew the batteries.
Connecting the mains adapter
You can also operate the device with a power adapter (not
supplied) that accords to the specifications given in the section
"Technical data".
1. For this, insert the plug of the power adapter into the
connection socket
2. Then insert the power adapter into a correctly installed
mains power socket supplying 230 V ~ / 50 Hz.
8 on the device.
- 39 -