oventrop Regtronic PSW Installation And Operating Instructions For The Specialised Installer page 8

Safety advice
Please pay attention to the following safety advice in order to avoid danger and
damage to people and property.
Instructions
Attention must be paid to the valid local standards, regulations and directives!
Target group
These instructions are exclusively addressed to authorised skilled personnel.
Only qualified electricians should carry out electrical works.
Initial installation must be effected by the system owner or qualified personnel
named by the system owner.
Description of symbols
WARNING! Warnings are indicated with a warning triangle!
Î They contain information on how to avoid the danger
described.
Signal words describe the danger that may occur, when it is not avoided.
• WARNING means that injury, possibly life-threatening injury, can occur.
• ATTENTION means that damage to the appliance can occur.
Î Arrows indicate instruction steps that should be carried out.
Note
Notes are indicated with an information symbol.
© 20191118_11206324_Oventrop_Regtronic_PSW.mon3s.indd
8
Information about the product
Proper usage
The device is designed for use in solar thermal systems and heating systems in
compliance with the technical data specified in this manual.
Improper use excludes all liability claims.
CE Declaration of conformity
The product complies with the relevant directives and is therefore la-
belled with the CE mark. The Declaration of Conformity is available
upon request, please contact the manufacturer.
Note
Strong electromagnetic fields can impair the function of the device.
Î Make sure the device as well as the system are not exposed to strong
electromagnetic fields.
Disposal
• Dispose of the packaging in an environmentally sound manner.
• Dispose of old appliances in an environmentally sound manner. Upon request
we will take back your old appliances bought from us and guarantee an environ-
mentally sound disposal of the devices.
Subject to technical change. Errors excepted.
Contents
1 Overview ............................................................................................. 9
2 Installation ........................................................................................ 10
2.1 Mounting .................................................................................................................... 10
2.2 Electrical connection ............................................................................................... 10
2.3 Inverting the output signal ..................................................................................... 11
2.4 Application examples (pump with PWM control) ........................................... 11