Special Safety Instructions; Main Components - no-flame 83284 Instruction Manual

PHOTOELECTRIC SMOKE ALARM
Introduction
To get the most out of your new
photoelectric smoke alarm, please read
through these instructions before use.
We also recommend that you save the
instructions in case you need to refer to
them at a later date.
Technical data
Type: Photoelectric smoke alarm
Power consumption, smoke detector: ≤ 12
µA
Power consumption, transmitter: ≤ 230 µA
Operating temperature:
Alarm:
Size:
Frequency:
SRD receiver class:
Max. distance between alarms
(without obstacles):
Includes 1 x 9 V battery and 3 x 1.5 AA
batteries
1
2
6
-10 to +40 ºC
≥ 85 dB/3 m
Ø 125 × 48 mm
433.92 Mhz
Class 3 (non-critical)
60 m
3

Special safety instructions

The smoke alarm should not be installed
anywhere where dust, smoke or steam
is commonly present, for example, near
cookers, in boiler rooms or bathrooms.
Test the smoke alarm regularly by pressing
the test button.
The wireless connection between the
smoke alarms means that the activation
of one smoke alarm activates all the
connected smoke alarms. If there is a lot of
external interference, this can only aff ect
the smoke alarms' wireless connection, but
not their warning function over all.

Main components

1. Casing
2. Test button and LED
3. The LEARN button (connecting several
alarms) and LED
4. Battery compartment for 9 V battery
5. Battery compartment for 1.5 V batteries
6. Mounting plate
5
GB
4
11