Advertisement
Handle
Basket
1
• Place the basket on a flat surface and "snap" the handle
into the basket.
Support B
2
• Fit the support marked with an "A" into the slots in the
base marked "A".
• Press to "snap" the support in place.
• Repeat this procedure to attach support "B" to the base.
Support A
B
A
Base
Assembly
3
• Turn the base over so the bottom is facing you. Insert
four screws into the holes in the bottom of the base
and tighten.
• Turn the base upright again.
4
• "Snap" the basket assembly onto the supports, as shown.
• Insert four screws into the holes in the top of the basket
and tighten.
One-time assembly is now complete.
3
Advertisement
