Xtech XTA311 Quick Installation Manual page 3

1a-2. Select among the M6x14 (G), M6x20 (L), M8x20 (M), M6x30 (N) or
M8x30 (O) screws and using a screwdriver, attach the soundbar mount to the
TV wall mount. (The screw type will depend on the TV wall mount and/or
soundbar).
Note: Depending on the holes of the brackets you will or won't need some
components as shown in the images below. TV wall mount not included.
- If you select the M6x14 screws to attach the soundbar mount to the TV wall
mount, you might need to use the two washers (R) as shown in the image.
G
1
R
- If you choose the M6x20 or the M8x20 screws, you will also need to use the
washers (P) and the other washers (R) to attach the soundbar mount to the TV
wall mount.
L/M
1
P
R
L/M
1
P
R
G
2
L/M
2
P
L/M
2
P
XTA311
- If you choose the M6x30 or M8x30 screws, you will also need to use the
spacers (Q) and the washers (R) to attach the soundbar mount to the TV wall
mount.
1
N/O
Q
R
- Depending on the size of the TV wall mount, you might have to use the
spacers (Q), the washers (P), and the other washers (R) to attach the M6x30 or
M8x30 screws as shown or just the spacers and the washers (P).
1
N/O
Q
P
R
2. Your assembly is complete. Check if the brackets are secure and safe to
use at regular intervals (at least every three months).
Note: The sound bar mount can be installed in a wide, straight, or narrow
position depending on the mounting holes of the soundbar being used.
TV soundbar
mount
N/O
2
Q
N/O
2
Q
P