Advertisement
Quick Links
MODEL MBSP
12 VOLT BATTERY BACK-UP
SUMP PUMP SYSTEM
INSTALLATION AND SERVICE MANUAL
NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible
party who maintains the system.
Part # 23833A200 | © 2012 Pentair Pump Group, Inc. | 11/08/12
Advertisement
Related Manuals for Pentair MYERS MBSP
Summary of Contents for Pentair MYERS MBSP
- Page 1 INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system. Part # 23833A200 | © 2012 Pentair Pump Group, Inc. | 11/08/12...
- Page 2 CAUTIONS/WARNINGS INSTALLATION INSTRUCTIONS 1. Disconnect power to the primary sump pump. Failure to follow instructions could cause serious bodily injury and/or property damage. Use only as 2. Assemble control panel to battery box with four a back-up sump pump in residential wastewater screws included.
- Page 3 The float switch should turn this pump ON near the If the voltage of the battery drops lower than 11 volts top of the pump and at least 2" down from the top DC, the LOW battery indicator will come on and the of the sump.
- Page 4 Warranty is effective only if Pentair Myers authorized control panels are used. All seal fail and heat sensing devices must be hooked up, functional and monitored or this warranty will be void. Pentair Myers will cover only the lower seal and labor thereof for all dual seal pumps. Under no circumstance will Pentair Myers be responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair Myers service facility.
Need help?
Do you have a question about the MYERS MBSP and is the answer not in the manual?
Questions and answers