Hoover Nextra HNF 6137 Instruction Book page 22

40003219Eng.qxd 24/06/2005 19:21 Page 22
Temperature Selector ( )
The washing machine is equipped with a
temperature selector knob to set the temperature
you require. Bigger energy savings can be
achieved by using the lower temperature settings
around the dial between and 40°C. By
selecting the position, the wash temperature
is limited to the water inlet temperature, thus
reducing energy consumption further. We
recommend that the temperature shown on wash
care garments should never be exceeded.
In the case where the temperature has been
accidentally set higher than that of the chosen
programme, (see Programme Guide table), the
machine will lower the temperature automatically
to protect the fabrics.
Spin Speed Selector
( )
By adjusting the control knob it is possible to
reduce the maximum spin speed of your selected
programme to suit your needs and to help reduce
any creasing of fabrics. Turn the selector knob
until the indicator aligns with the required spin
speed. The maximum spin speed will vary
depending on the specification of the machine.
22