Replacement Parts - Tequipment FLUKE i410 Service Information

i410/i1010
AC/DC Current Clamp
Reassembling the Current Clamp
After you have completed the last calibration step and checked the AC Amps function, do the following:
1. Replace the decal over the potentiometer access holes.
2. Replace the battery cover and its securing screw.
The Current Clamp is now ready for normal operation.

Replacement Parts

Replacement parts are listed in Table 5 and shown in Figure 3. To obtain replacement parts, call Fluke
Corporation at 1-800-526-4731.
i410 Case Top Decal
i1010 Case Top Decal
Battery Door
Top Case and Zero Knob
PCB Assembly
Case Screw
Jaw Spring
Bottom Case
Brass Cable Clamp
Power On/Off Button (green)
Output Cable Assembly
Jaw Assembly
Poron Ring
8
Table 5. Replacement Parts
Part Description Part No.
642584
642592
642600
642618
642626
642634
642642
642645
642659
642675
642683
603602
642535