Connecting An Iphone - iCreation i-450 Product Information Manual

2. Turn on the Bluetooth feature of your iPhone. Click
Settings, General, Bluetooth and OFF, then the
iPhone searches for available devices.
3. Press and hold
red and blue indicator flash alternately.
4. When the iPhone finds i-450, click Not Paired to
connect it with the base. The iPhone prompts you to
enter the PIN (the default PIN is 0000). Enter it, then
click Pair to confirm. When the iPhone is successfully
connected, Connected displays, and the handset blue
indicator flashes, 1 second on and then 3 seconds off.
Notes:
Make sure the handset and the iPhone are no more than
a meter apart, so they are within operable range.
If the handset is not successfully paired within 2 minutes,
after a long beep, it will automatically leave pairing mode.
If you still want to pair, please repeat the steps of pairing
again.

Connecting an iPhone

Although two iPhones can be paired with the Bluetooth handset,
only one iPhone can be connected to the base and be engaged
in a call at one time.
The Bluetooth handset will connect to the last paired iPhone
automatically when the handset is switched off then on, and
within 10 meters range. Ensure the Bluetooth feature is
enabled on the iPhone.
MFB for about 6 seconds until the
10