Advertisement
Connecting the switch
Connecting the devices to the switch and managing the switch using a web
browser
Step 1: Connect the supplied power cord to the switch and plug the other end
into an electrical outlet. Verify the Power LED indicator is lit on the switch.
Step 2: Wait for the switch to complete boot up. It might take few minutes for
the switch to complete boot up.
Step 3: Connect one end of a Category 5/6 Ethernet cable into the Gigabit
(10/100/1000) Ethernet port on the switch's front panel and the other end to
Ethernet port on the computer. Verify that the LED on Ethernet ports of the switch
are green.
Step 4: Once your computer is on, ensure that your TCP/IP is
set to 'On' or 'Enabled'. Open 'Network Connections' and then click
'Local Area Connection'. 'Select Internet Protocol Version 4 (TCp/IPv4)'.
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wifiabc.com
EGS5212FP
Step 5: If your computer is already on a network, ensure that you have set it to
a Static IP Adress on the interface. (Example: 192.168.0.10 and the Subnet
Mask address as 255.255.255.0)
Step 6: Open a web browser on your computer. In the address bar of the web
browser, enter 192.168.0.239 and enter.
Step 7: A login screen will appear. By default, username is admin and the
password is password. Enter the current username and password of the
switch and then click 'Login'.
Step 8: The switch's web-based Graphical User Interface (GUI) page screen will
appear. Use it to perform switch configuration and monitoring.
Disclaimer: Information may be subject to changes without prior notification.
Quick Installation Guide
https://www.linkedin.com/company/engeniuseurope
https://twitter.com/engeniuseu
Follow us
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
Advertisement
