Advertisement
M910165 Operator Instructions Sheet (Manual PN: M960146)
Turning the System ON/OFF
Power On: Press the
and begin temperature control
Power Off: Press the
control
Note: the installer may bypass the power off feature
System Modes
Cooling Indicator
Changing Temperature Display Unit
1. Hold the
seconds to access the main menu
to scroll down to the "Temp Unit" option.
2. Use
3. Use the
and
4. Press
key to verify the temperature unit
5. To return to the main menu screen press
main menu by pressing
seconds
button once to turn on the controller
button once to turn off temperature
Refer to manual for all defrost symbols
and
keys simultaneously for 3
keys to scroll through °F or °C.
again or by waiting 30
Defrost Indicator
. Exit the
Heating Indicator
Advertisement
Table of Contents
Related Manuals for ATC M910165
Summary of Contents for ATC M910165
- Page 1 M910165 Operator Instructions Sheet (Manual PN: M960146) Turning the System ON/OFF Power On: Press the button once to turn on the controller and begin temperature control Power Off: Press the button once to turn off temperature control Note: the installer may bypass the power off feature...
- Page 2 Setpoint changes Press to adjust the setpoint temperature. The current temperature will blink once, before it increases or decreases depending on which arrow key is pressed Manual Defrost Press the key for 3 seconds to attempt a manual defrost Alarm Codes Code Description Action...
Need help?
Do you have a question about the M910165 and is the answer not in the manual?
Questions and answers