D-Link COVR-C1213 User Manual page 38

Section 3 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
Select Create a new session to start a new PPPoE session.
PPPoE Session:
Enter the username provided by your ISP.
Username:
Enter the password provided by your ISP.
Password:
Select Static IP if your ISP assigned you an IP address. In most cases,
Address Mode:
select Dynamic IP.
If you selected Static IP as the Address Mode, enter the IP address
IP Address:
provided by your ISP.
Enter the ISP service name (optional).
Service Name:
Select either Always On or Manual.
Reconnect Mode:
Maximum Transmission Unit - you may need to change the MTU for
MTU:
optimal performance with your ISP.
D-Link COVR-C1213 User Manual
PPPoE
34