Remote Controller - KUL KU-SAC120W User Manual

REMOTE CONTROLLER

No.
Button
(TEMP UP)
1
(TEMP DN)
2
3
ON/OFF
FAN
4
5 TIMER
6 SLEEP
7
ECO
8 MODE
SUPER or TURBO
9
10
SWING
11
CLOCK
12 DISPLAY
13
HEALTHY
When you press "3D", the horizontal and vertical vanes will swing together at the
3D
14 same time.
15 RESET
ANTI-MILDEW
or
16
Mute
To activate the function of Mute
The out looking and some function of remote controller maybe difference.
The shape and position of buttons and indicators maybe difference according to the model, but their
function is the same.
The unit confirms the correct reception of each press button with a beep.
Function
Press it to increase temperature / time setting.
Press it to decrease temperature/ time setting.
Press it to start or stop operation.
To select the fan speed of auto/low/mid/high
Press it to set auto-off timer
To activate the function
In cooling mode,press this button ,the temperature will increase 2
setting temperature
In heating mode, press this button, the temperature will decrease 2
setting temperature
To select the mode of operation
Press this button to activate / deactivate the Super function which enables the unit to reach
the preset temperature in the shortest time.
In COOL mode, the unit will
speed.
In HEAT ode, the unit will
speed.
To activate or deactivate of the movement of the deflectors.
When you press this button,the time will be flickering;then through"
" ",you can adjust the time(one time you press,one minute you adjust;and if
you continue to press,the time change rapidly ), after adjusting to your required
time, please press this button again to fix the time.
To switch on/off the LED display
To switch - on /off HEALTHY funtion.It is a button which controls the ionizer or
plasma genera for available model only.
To restart REMOTE CONTROLLER
To activate the function ANTI-MILDEW
or
.
SLEEP
give the maximum cooling temperature with 16 ,
give the maximum heating temperature with 31 ,high fan
7
on the base of
on the base of
high fan
"and