Philips 6825 Series User Manual page 29

HDR Plus
 (Home) > Settings > All
settings > Picture > Expert mode settings > HDR
Plus
Set HDR Plus to Off, Minimum, Medium,
Maximum or Automatic to set the level at which the
TV automatically shows superior contrast and
brightness effect for HDR content.
Note: Available when HDR (High-Dynamic Range)
signal is detected.
• The TV can play HDR programs from any HDMI
connection, broadcast, Internet source (e.g. Netflix) or
connected USB memory device.
Dynamic Contrast
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Dynamic contrast
Select Maximum, Medium, or Minimum to set the
level at which the TV automatically enhances the
details in the dark, middle and light areas of the
picture.
Video Contrast, Gamma
Video contrast
 (Home) > Settings > All
settings > Picture > Expert mode settings > Video
contrast
Press the arrows  (up) or  (down) to adjust the
video contrast level.
Gamma
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Gamma
Press the arrows  (up) or  (down) to set a non-
linear setting for picture luminance and contrast.
Super Resolution
 (Home) > Settings > All
settings > Picture > Expert mode settings > Super
resolution
Select On to have a superior sharpness in line edges
and details.
Picture Clean
Noise reduction
 (Home) > Settings > All
settings > Picture > Expert mode settings > Noise
reduction
Select Maximum, Medium, Minimum to set the
level for removing the noise in video content.
Noise is mostly visible as small moving dots in on-
screen picture.
MPEG Artifact Reduction
 (Home) > Settings > All
settings > Picture > Expert mode
settings > MPEG Artifact Reduction
Select Maximum, Medium, Minimum to have
different degrees of smoothing the artifacts in digital
video content.
MPEG artifacts are mostly visible as small blocks or
jagged edges in on-screen images.
Picture Format
 (Home) > Settings > All
settings > Picture > Picture format
If the picture is not filling the whole screen, if black
bars are showing on the top or bottom or at both
sides, you can adjust the picture to fill the screen
completely.
To select one of the basic settings to fill the screen...
• Wide screen – automatically zooms in the picture
to wide screen.
• Fill screen – automatically enlarges the picture to
fill the screen. Picture distortion is minimal, subtitles
remain visible. Not suitable for PC input. Some
extreme picture formats may still show black bars.
• Fit to screen – automatically zooms in the picture
to fill the screen without distortion. Black bars may be
visible. Not supported for PC input.
• Original – shows the original format of the incoming
picture.
 (Home) > Settings > All
settings > Picture > Picture format > Advanced
To format the picture manually...
• Shift – select on the arrows to shift the picture. You
can only shift the picture when it is zoomed in.
• Zoom – select on the arrows to zoom in.
• Stretch – select on the arrows to stretch the
picture vertically or horizontally.
• Undo – select to return to the picture format you
started with.
29