Recording And Pause Tv; Recording - Philips 6825 Series User Manual

9
Recording and
Pause TV
9.1

Recording

What You Need
You can record a digital TV broadcast and watch it
later.
To record a TV program, you need...
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on-screen TV
Guide
• a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
You cannot record when you are using Pause TV.
In terms of enforcement of copyright legislation, some
providers can apply different restrictions by means of
DRM (Digital Right Management) technology. If
broadcasting protected channels, recording, record
validity or number of views may be restricted.
Recording may be completely prohibited. If trying to
record a protected broadcasting or play back an
expired recording, an error message can appear.
Record a program
Record Now
To record the program you are watching right now,
press  (Record) on the remote control. The
recording will start immediately.
To stop recording, press  (Stop).
When TV Guide data is available, the program you are
watching will be recorded from the moment you
pressed the recording key until the program ends.
• If you receive TV guide information from the
broadcaster, the recording starts immediately. You
can adjust the end time of the recording in the list of
recordings.
Schedule a Recording
You can schedule a recording of an upcoming
program for today or a few days from today
(maximum of 8 days away). The TV will use the data
from the TV Guide to start and end the recording.
To record a program...
1 - Press  TV GUIDE.
2 - On the TV guide, select the channel and program
you wish to record. Press  (Right) or  (Left) to
scroll through the programs of a channel.
3 - With the program highlighted, press the color
key  Record . The program is now scheduled for
recording. A warning will show automatically when
overlapping recordings are scheduled. If you plan to
record a program in your absence, remember to leave
the TV switched to Standby and the USB Hard Drive
switched on.
List of Recordings
You can view and manage your recordings in the list
of recordings. Next to the list of recordings, there is a
separate list for scheduled recordings and reminders.
To open the list of recordings...
Press  TV GUIDE.
1 - Press the color key
2 - In the list of recordings, select the
tabs New, Watched or Expired and press OK to
filter your view.
3 - With a recording selected in the list, you can
remove the recording with the color
key  Remove . You can rename a recording
with the color key
Broadcasters can limit the number of days a recording
can be viewed. When this period expires, the
recording will be marked as expired. A recording in
the list shows the number of days before it expires.
When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
recording is marked as Failed.
Manual recording
You can schedule a recording that is not linked to a
TV program. You will set the tuner type, channel, and
the start and end times yourself.
To schedule a recording manually...
1 - Press  TV GUIDE.
2 - Press the color key
3 - Press the color key
4 - Select the tuner from where you want to record
and press OK.
5 - Select the channel to record from and press OK.
6 - Select the day of the recording and press OK.
7 - Set the start and end time of the recording. Select
a button and use the  (up) or  (down) keys to
set the hours and minutes.
8 - Select Schedule and press OK to schedule the
manual recording.
22
 Recordings .
 Rename.
 Recordings .
 Schedule and press OK.