Rio PROLIFT User Manual page 15

NO PULSE
• Dry gel pads - Moisten gel pads with a small amount
of water.
• No battery installed - Insert batteries.
• Wrong battery polarity - Follow the instructions on
page 5.
• Low battery - Replace with new batteries.
• Circuit not working properly - Remove batteries for
1 minute. Then replace batteries and try unit again.
LIGHT 4 FLASHES AND
UNIT TURNS OFF
• Low battery - Replace batteries.
T R OU BL ES HO O T IN G
WEAK PULSE
• Dry gel pads - Moisten gel pads with a small amount
• Low intensity - Increase by pressing the "+" buttons.
• Low battery - Replace batteries.
• Aged gel pads - Replace the gel pads.
RED SKIN AREA AFTER USE
• Over use - Reduce duration and/or frequency of use.
• Damaged or dried pad - Dampen the gel pad with a
LOOSE ATTACHMENT OF THE PADS
• The pads are worn/damaged - Replace pads.
13
of water.
very small amount of water. If this does not work replace
gel pads.