Table of Contents
Advertisement
Insert headset cable into control
1
unit. Important: Do not remove or
insert the cable while the unit is on.
L
M
R
Turn on by pressing the on/off
button, light 1 will flash.
NOTE: If not in use, the unit will enter
stand by mode and automatically
turn off after 20 minutes.
Press the " M " button to select
2
your required programme (see
Programme Selection).
L
M
R
I N S T R UC T I O NS
3
L
TIP: There are 40 intensity levels in total and the
programme light will flash once each time the intensity is
changed. When on maximum intensity, the programme
light will remain illuminated.
4
L
9
Increase the intensity level by
separately pressing both the left
(L) and right (R) "+" buttons, until
M
R
you feel a tingling sensation. You
may need to adjust the gel pad
positioning slightly to find the best
contact point.
Select a level which is comfortable.
To decrease the intensity simply
M
R
press the " - " button.
Advertisement
Table of Contents
