Fireplace Installation
reduce the risk of fire, electric
shock and injury to persons.
Do not attempt to wire your
own new outlets or circuits. To
reduce the risk of fire, electric
shock or injury to persons,
always use a licensed
electrician.
Operation
Figure 1
2
1
3
NOTE: 2-AAA Batteries Not Included.
6
Installation
①
Make sure the unit's Main On/
Off Switch is switched Off (refer to
operating instruction section).
②
Plug the unit into a 15 Amp,
120 VAC outlet.
The controls are located on
the right side of the heater panel
(Figure 1).
A. Main On/Off Switch 1
The Main On/Off switch supplies
power to all unit functions (heat/
flame).
B. Heat On/Off Switch 2
The Heat On/Off Switch supplies
power to the heater fan and the
heater element.
C. On/Off Remote Control 3
The On/Off Remote Control is
included, ensure the Main Switch
1 is in ON,
is for switch OFF.
is for switch ON,