Table of Contents
Advertisement
lifesmart
is a registered trademark of
®
Supply Chain Sources LLC., All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Purchase Date ____________Serial Number (
Questions, problems, missing parts? Contact technical support department at
657-341-0362, 8:00 a.m. - 5 p.m., CST, Monday - Friday or visit us online at
www.lifesmartcomfort.com
Please have your model and serial number ready
REV1-080317
INFRARED QUARTZ
) __________________
located on back of unit
1
FIREPLACE
Customer number:
ZCFP2042US
Advertisement
Table of Contents
Related Manuals for Life Smart ZCFP2042US
Summary of Contents for Life Smart ZCFP2042US
- Page 1 ® Supply Chain Sources LLC., All Rights Reserved. Customer number: ZCFP2042US ATTACH YOUR RECEIPT HERE Purchase Date ____________Serial Number ( ) __________________ located on back of unit Questions, problems, missing parts? Contact technical support department at 657-341-0362, 8:00 a.m.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . - Page 3 PACKAGE CONTENTS PART DESCRIPTION QUANTITY Infrared Heater Remote Control Control Panel (preassembled to Infrared Heater (A)) Temperature Sensor (preassembled to Infrared Heater (A)) 3-prong Power Cord (preassembled to Infrared Heater (A))
-
Page 4: Safety Information
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product . IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO . When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: •... - Page 5 SAFETY INFORMATION Child Lock Safety Feature Press and hold the child lock button located on the control panel for 5 seconds or remote control for 3 seconds . Locking is confirmed when a buzzer rings and the control panel displays “CL” . When locked, the control panel and remote control (if provided) will not function .
-
Page 6: Frequently Asked Questions
FREQUENTLY ASKED QUESTIONS Please review these frequently asked questions on the next few pages prior to using your heater . Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time. - Page 7 FREQUENTLY ASKED QUESTIONS Q. The temperature on my heater does not match the temperature display on my wall, or external thermostat. Why? A. This is completely normal . The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat) . This is because the temperature sensor on the heater reads the temperature directly around the heater .
-
Page 8: Preparation
PREPARATION Place the heater on a firm, level surface and plug into a grounded 120 V, 60 Hz power outlet and turn on the power switch on the rear of the unit . Only operate heater in upright position . Insert two AAA batteries into the remote control before using (batteries not included) . -
Page 9: Control Panel
CONTROL PANEL PART NAME DESCRIPTION Digital Display Readout of the set room temperature or timer value Celsius Indicator Light Indicates that the temperature is being displayed in Celsius Fahrenheit Indicator Light Indicates that the temperature is being displayed in Fahrenheit Power Indicator Light Indicates when the unit is receiving power from the wall outlet Power Switch Button... -
Page 10: Remote Control
REMOTE CONTROL PART NAME DESCRIPTION Temp Up Button Increases the set temperature value Mode Button Toggles between the three heat modes available Temp Down Button Decreases the set temperature value Power Button Powers the heater on or off Short press: Toggles the Flame Effect from High/Med/Low/Off . / Flame/Lock Button Long press: for 3 seconds to activate lock function . -
Page 11: Operating Instructions
OPERATING INSTRUCTIONS 1 . Turn the heater on or off by pressing the Power button on the control panel (C) or by pressing the ON/OFF button on the remote control (B) . Once the power is off, heating elements will stop working first . The fan will continue working for up to 90 seconds to dispense residual heat inside the heater . - Page 12 OPERATING INSTRUCTIONS 4 . To set the timer to power off the heater, start the unit and press the Timer button on the control panel (C) or remote control (B) . Note: The timer-power-off function can only be set when the heater is in power-on mode .
-
Page 13: Care And Maintenance
CARE AND MAINTENANCE WARNING: Before performing any maintenance task, unplug the unit, and allow it to cool completely . To keep the heater clean, clean the outer shell with a soft, damp cloth . Use a mild detergent if necessary . After cleaning, dry the unit with a soft cloth . CAUTION: DO NOT let liquid enter the heater . -
Page 14: One-Year Limited Warranty
ONE-YEAR LIMITED WARRANTY The manufacturer warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase . Your sales receipt showing the date of purchase of the product is your proof of purchase . Keep it in a safe place for future reference . This warranty is subject to personal use only, commercial or rental applications will not be covered . -
Page 15: Replacement Parts List
REPLACEMENT PARTS LIST For replacement parts, call our technical support department at 657-341-0362, 9 a .m . - 5 p .m ., PST, Monday - Friday PART DESCRIPTION PART # Control panel COPA-F2016 FAN6048 Power board POBO-F2016 Tip-over switch TIPSW Spindle Motor SMOTOR Manual Thermostat... - Page 16 PLEASE REMEMBER TO REGISTER YOUR WARRANTY: web: www.lifesmartcomfort.com email: cs@scsources.com Printed in China lifesmart is a registered trademark ® of Supply Chain Sources., All Rights Reserved...