Advertisement
Operation Guide 3366
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Power Saving
When turned on, Power Saving automatically enters a sleep state whenever the watch
is left for a certain period in an area where it is dark. The table below shows how
watch functions are affected by Power Saving.
• There are actually two sleep state levels: "display sleep" and "function sleep".
Elapsed Time in Dark
60 to 70 minutes
Digital display off, but all functions are enabled and the
(Display Sleep)
power saving on indicator flashes on the display
• Digital display off, but the power saving on indicator
6 or 7 days
flashes on the display
(Function Sleep)
• All functions, including analog timekeeping, disabled
• Internal timekeeping maintained
• Wearing the watch inside your sleeve can cause it to enter the sleep state.
• The watch will not enter the sleep state while the digital time is between 6:00 AM
and 9:59 PM. If the watch is already in the sleep state when the digital time reaches
6:00 AM, however, it will remain in the sleep state.
• The analog hands move to the 12 o'clock position when the watch enters the
function sleep state. If the analog time and digital time do not match after the watch
recovers from the function sleep state, adjust the analog hand setting so it matches
the digital time.
• The watch will not enter the sleep state while it is in the Stopwatch Mode.
To recover from the sleep state
Perform any one of the following operations.
• Move the watch to a well-lit area. It can take up to two seconds for the display to turn
on.
• Press any button.
• Angle the watch towards your face for reading.
To turn Power Saving on and off
1. While any screen other than the last signal screen is on
Power saving
the display in the Timekeeping Mode, hold down A
on indicator
until the city code starts to flash, which indicates the
setting screen.
2. Press C nine times until the Power Saving on/off
screen appears.
3. Press D to toggle Power Saving on (
(
jsOw
).
4. Press A to exit the setting screen.
• The Power Saving on indicator is on the display in all
modes while Power Saving is turned on.
Auto Return Features
• The watch automatically returns to the Timekeeping Mode if you do not perform any
button operation for two or three minutes while the Battery Level Screen is
displayed, or while in the Alarm, or Hand Setting Mode.
• If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch automatically exits the setting screen.
Scrolling
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls through the data at high speed.
Initial Screens
When you enter the Timekeeping, World Time, or Alarm Mode, the data you were
viewing when you last exited the mode appears first.
Radio-controlled Atomic Timekeeping Precautions
• Strong electrostatic charge can result in the wrong time being set.
• Even when the watch is within the reception range of the transmitter, signal
reception will be impossible if the signal is blocked by mountains or other geological
formations between the watch and signal source.
• Signal reception is affected by weather, atmospheric conditions, and seasonal
changes.
• The time calibration signal bounces off the ionosphere. Because of this, such factors
as changes in the reflectivity of the ionosphere, as well as movement of the
ionosphere to higher altitudes due to seasonal atmospheric changes or the time of
day may change the reception range of the signal and make reception temporarily
impossible.
• Even if the time calibration signal is received properly, certain conditions can cause
the time setting to be off by up to one second.
• The current time setting in accordance with the time calibration signal takes priority
over any time settings you make manually.
• The watch is designed to automatically update the date and day of the week for the
period January 1, 2000 to December 31, 2099. Setting of the date by the time
calibration signal cannot be performed starting from January 1, 2100.
• This watch can receive signals that differentiate between leap years and non-leap
years.
• Though this watch is designed to receive both time data (hour, minutes, seconds)
and date data (year, month, day), certain signal conditions can limit reception to time
data only.
• Normally, the signal reception date shown by the last signal screen is the date data
included in the received time calibration signal. When only time data is received,
however, the last signal screen shows the date as kept in the Timekeeping Mode at
the time of signal reception.
• If you are in an area where proper time calibration signal reception is impossible, the
watch keeps time within ±15 seconds a month at normal temperature.
• If you have problems with proper time calibration signal reception or if the time
setting is wrong after signal reception, check your current city code, DST (summer
time) settings, and auto receive setting. The following are the initial factory defaults
for these settings.
City code (
NYC
/New York); DST (
AvtA
Operation
jsOo
) and off
/Auto switching); Auto receive (
ON
/On)
Timekeeping
• Resetting the seconds to
00
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
00
without changing the minutes.
• The year can be set in the range of 2000 to 2099. The day of the week is calculated
automatically in accordance with the date.
• The watch's built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch's battery replaced or when battery power drops to
Level 4.
• The current time for all city codes in the Timekeeping Mode and World Time Mode is
calculated in accordance with the Greenwich Mean Time (GMT) differential for each
city, based on your Home City time setting.
• GMT differential is calculated by this watch based on Universal Time Coordinated
(UTC
*
) data.
UTC is the world-wide scientific standard of timekeeping. It is based upon carefully
*
maintained atomic (cesium) clocks that keep time accurately to within microseconds.
Leap seconds are added or subtracted as necessary to keep UTC in sync with the
Earth's rotation. The reference point for UTC is Greenwich, England.
12-hour/24-hour Timekeeping Formats
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
also applied in all other modes.
• With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
Illumination Precautions
• The illumination provided by the light may be hard to see when viewed under direct
sunlight.
• Illumination automatically turns off whenever an alarm sounds.
• Frequent use of illumination shortens the battery operating time.
Auto light switch precautions
• Wearing the watch on the inside of your wrist, movement of your arm, or vibration of
your arm can cause frequent activation of the auto light switch and illumination of the
face of the watch. To avoid running down the battery, turn off the auto light switch
whenever engaging in activities that might cause frequent illumination of the face.
• Note that wearing the watch under your sleeve while the auto light switch is turned
on can cause frequent illumination of the face and can run down the battery.
• Illumination may not turn on if the face of the watch is
More than 15 degrees
more than 15 degrees above or below parallel. Make
too high
sure that the back of your hand is parallel to the ground.
• Illumination turns off after the preset illumination
duration (see "To specify the illumination duration"),
even if you keep the watch pointed towards your face.
• Static electricity or magnetic force can interfere with proper operation of the auto
light switch. If illumination does not turn on, try moving the watch back to the starting
position (parallel with the ground) and then tilt it back towards your face again. If this
does not work, drop your arm all the way down so it hangs at your side, and then
bring it back up again.
• Under certain conditions, illumination may not turn on until about one second after
you turn the face of the watch towards you. This does not necessarily indicate
malfunction of the auto light switch.
• You may notice a very faint clicking sound coming from the watch when it is shaken
back and forth. This sound is caused by mechanical operation of the auto light
switch, and does not indicate a problem with the watch.
City Code Table
City
GMT
City
Code
Differential
–11
–11.0
Pago Pago
HNL
Honolulu
–10.0
Papeete
ANC
Anchorage
–09.0
Nome
San Francisco, Las Vegas, Vancouver,
LAX
Los Angeles
–08.0
Seattle/Tacoma, Dawson City, Tijuana
DEN
Denver
–07.0
El Paso, Edmonton, Culiacan
Houston, Dallas/Fort Worth,
CHI
Chicago
–06.0
New Orleans, Mexico City, Winnipeg
Montreal, Detroit, Miami, Boston,
NYC
New York
–05.0
Panama City, Havana, Lima, Bogota
CCS
Caracas
–04.0
La Paz, Santiago, Port of Spain
RIO
Rio De Janeiro
–03.0
Sao Paulo, Buenos Aires, Brasilia, Montevideo
–02
–02.0
–01
–01.0
Praia
GMT
Dublin, Lisbon, Casablanca, Dakar, Abidjan
+00.0
LON
London
PAR
Paris
Milan, Rome, Madrid, Amsterdam, Algiers, Hamburg,
+01.0
Frankfurt, Vienna, Stockholm
BER
Berlin
ATH
Athens
Helsinki, Istanbul, Beirut, Damascus,
CAI
Cairo
Cape Town
+02.0
JRS
Jerusalem
JED
Jeddah
+03.0
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow
THR
Tehran
+03.5
Shiraz
DXB
Dubai
+04.0
Abu Dhabi, Muscat
KBL
Kabul
+04.5
KHI
Karachi
+05.0
Male
DEL
Delhi
+05.5
Mumbai, Kolkata
DAC
Dhaka
+06.0
Colombo
RGN
Yangon
+06.5
BKK
Bangkok
+07.0
Jakarta, Phnom Penh, Hanoi, Vientiane
Singapore, Kuala Lumpur, Beijing, Taipei, Manila, Perth,
HKG
Hong Kong
+08.0
Ulaanbaatar
SEL
Seoul
Pyongyang
+09.0
TYO
Tokyo
ADL
Adelaide
+09.5
Darwin
SYD
Sydney
+10.0
Melbourne, Guam, Rabaul
NOU
Noumea
+11.0
Port Vila
WLG
Wellington
+12.0
Christchurch, Nadi, Nauru Island
• Based on data as of December 2003.
Other major cities in same time zone
5
Hide quick links:
Advertisement
