QUICK START GUIDE (PROPANE)
16
1.
1.
Add oil
Add oil
The oil fill cap is located on the lower engine block to the
The oil fill cap is located on the lower engine block to the
right of the recoil start housing. Remove the oil fill cap and
right of the recoil start housing. Remove the oil fill cap and
fill with 10w30 oil.
fill with 10w30 oil.
2.
2.
Connect propane hose
Add gasoline
The fuel cap is located on top of the fuel tank. Fill the tank
The LPG inlet is located on the bottom left of the front
panel. Connect the propane hose to both the inlet and the
with fresh unleaded gasoline 87 octane or higher. The tank
propane tank. Open the propane tank.
is full when you see fuel in the bottom of the fuel filter cup.
DO NOT overfill the tank.
3.
3.
Select Gasoline Fuel
Select LPG fuel
The fuel selector is located on the left side of the front
The Fuel Selector is located on the left side of the front
power panel. Flip the switch down to select LPG as a fuel
power panel. Flip the switch up to select gasoline as a fuel
source.
source.
4.
4.
Turn gas valve off
Turn gas valve on
The gas valve is located the left hand side of the panel.
The gas valve is located the left hand side of the panel.
Rotate the valve counterclockwise to the Fuel ON (RUN)
Rotate the valve counterclockwise to the fuel off (store)
position to turn off the gasoline supply.
position to turn on the gasoline supply.
5.
5.
Turn breaker off
Turn breaker off
The breaker is located on the left side of the front power
The breaker is located in the top center of the front power
panel. Flip the breaker down to prevent accidental load
panel. Flip the breaker down to prevent accidental load
when starting the generator.
when starting the generator.
Need help?
Do you have a question about the XP9000IH and is the answer not in the manual?