Electrolux ERN29801 User Manual page 41

VENTILATION REQUIREMENTS
min.
5 cm
200 cm
INSTALLING THE APPLIANCE
CAUTION!
Make sure that the mains cable
can move freely.
x
2
min.
200 cm
2
x
• Remove the lower door.
• Loosen the lower pin.
On the opposite side:
• Install the lower pin.
• Install the lower door.
• Refit the pins (B) and the spacers (C) on
the middle hinge on the opposite side.
• Install the upper door.
• Tighten the spacer and the upper pin.
The airflow behind the appliance must be
sufficient.
Do these steps.
If necessary cut the adhesive sealing strip
and then apply it to the appliance as shown
in figure.
ENGLISH 41