Download Print this page

WilTec 34277 Operation Manual page 3

Portable mini airbrush compressor set

Advertisement

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in -
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety precautions
CAUTION:
The use of this device is allowed only with fault current protection switch with a triggering nom-
inal current up to 30 mA (according to VDE 0100 Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited
physical, sensory and mental abilities or lack of experience and/or knowledge, unless they are
supervised by a person responsible for their safety or follow the instructions made by this per-
son on how to use the device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION:
Visually inspect the device before every use. Do not use the device if the safety appliances
are damaged or worn out. Never override the safety appliances.
Use the device exclusively according to the intended purpose stated in the instructions for
use.
You are responsible for the safety of the working environment.
If the cable or the plug is damaged due to external influences the cable must not be repaired,
but has to be replaced with a new one. This work can be carried out only by an electrician.
Never lift, carry or fix the device by using the power cable.
Make sure that the electrical plug connection is protected from flood and moisture.
Disconnect the mains plug before maintaining the compressor.
The user is responsible for complying with the location specific safety and mounting regula-
tions. Ask an electrician.
In case of device failure, the repairs can be carried out only by an electrician.
NOTES:
The user should choose the right compressor with the appropriate air volume and air pressure
to correspond to the actual work requirements.
Never expose the device to dust, acid, steam, explosive or flammable gases or atmospheric
influences (rain, sun, fog, snow).
Never use the compressor barefoot or with wet hands or feet.
Never allow children to touch the compressor switched-on or to insert the plug. It may cause
burns or electric shocks.
Do not open or damage any part of the compressor. If necessary, contact your seller.
Release the water by opening the drain valve before not using the compressor for a long time.
Store the compressor in a well ventilated place.
Always wear protective goggles. You should under no circumstances direct the airflow to-
wards your body, other persons' bodies or animals.
Never use the compressor in areas with steam or moisture or close to water.
Switch off the compressor if you do not use it. Disconnect it from the mains before repairing,
reconditioning, maintaining, cleaning, or replacing parts. Never use the power cable as
handle. Keep the power cable away from hot objects, oil and sharp edges. Protect it against
breakage. Do not pull the power cable in order to unplug it from the power socket.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 34277
Page 3
03
2021-1

Advertisement

loading