Dell E2221HN User Manual page 36

Before the DDC/CI function is disabled, the following message is displayed.
The following Power Warning Message box applies to Brightness functions for the first time
when you adjust the Brightness level above the default level.
When the monitor enters Standby mode, the following message appears.
If VGA or HDMI cable is not connected, a floating dialog box appears. The monitor will enter
Standby mode after 4 minutes if left at this state.
See Troubleshooting
│
36 Operating your monitor
Dell 2X Monitor
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
Yes
Dell 2X Monitor
Adjusting to this value will increase power consumption above the
default level. Do you want to continue?
Yes
Dell 2X Monitor
Going into Standby mode...
Dell 2X Monitor
No HDMI Cable
?
The display will go into Standby mode in 4 minutes.
www.dell.com/E2X21HN
for more information.
No
E2X21HN
No
E2X21HN
E2X21HN
E2X21HN