Advertisement
Dual Time Mode
To set the Dual Time
Hold down C.
Hour
Hour Minutes
Seconds
PM indicator
1. Hold down C until the hour digits start to flash.
2. Press A to increase the hour digits. Holding down A changes the digits at
high speed.
3. Press C to move the selection to the minutes digits.
4. Press A to increase the minutes digits. Holding down A changes the digits
at high speed.
5. Press C to move the selection to 12/24.
6. Press A to toggle the timekeeping format between 12-hour and 24-hour.
• When 12-hour format is selected, the indicator P appears on the display to
indicate "p.m." times. There is no indicator for "a.m." times.
7. Press C to complete the procedure.
• If you do not operate any button for a few minutes while a selection is
flashing, the flashing stops and the watch goes back to the Dual Time Mode
automatically.
• In the Dual Time Mode, the seconds count is synchronized with the seconds
count of the Timekeeping Mode.
USER'S GUIDE 2705
Press C.
Press C.
Minutes
12/24
Press C.
Stopwatch Mode
The Stopwatch Mode lets you measure elapsed time.
The range of the stopwatch is 59 minutes 59.99
seconds.
To use the Stopwatch
1. Press C to start the stopwatch.
2. Press C to stop the time measurement.
• You can press C as many times as you want to
resume and stop timing.
3. After you are finished using the stopwatch, hold
down C to clear the stopwatch time to all zeros.
Minutes
Seconds
1/100 second
2
Advertisement
