Section 3 − Operating Instructions; Helmet Controls; Low Battery Indicator - Hobart Creator Series Owner's Manual

SECTION 3 − OPERATING INSTRUCTIONS

3-1. Helmet Controls

1 2

3-2. Low Battery Indicator

1
3 4 5
.
Remove protective films from
lens before welding.
1 Low Battery Indicator
(See Section 3-2)
2 Variable Shade Control (See
Section 3-4)
3 Sensitivity Control
(See Section 3-5)
6
4 Lens Delay Control
(See Section 3-3)
5 Weld/Grind Mode Switch (See
Section 3-6)
6 Grind Mode Indicator (See
Section 3-6)
1 Low Battery Indicator
The low battery indicator lights when 2−3
days of battery life remain. If battery power
is low, install new CR2450 lithium batteries
(see Section 6).
.
The auto-darkening lens consumes
less than 1 microamp of battery power
when in the sleep mode. See Section
3-7 for more information on battery us-
age in the different power modes.
OM-281996 Page 5