Section 4 − Adjusting Headgear - Hobart Creator Series Owner's Manual

SECTION 4 − ADJUSTING HEADGEAR
5
.
There are four head-
gear adjustments:
headgear top, tight-
ness, angle adjust-
ment, and distance ad-
justment.
1 Headgear Top
Adjustment
Adjusts headgear for prop-
er depth on the head to en-
sure correct balance and
stability.
1
2 4
2 Headgear Tightness
Adjustment
To adjust, turn the adjust-
ing knob located on the
back of the headgear left or
right to desired tightness.
3 Angle Adjustment
Slots on the right side of the
headband provide adjust-
ment for the forward tilt of
the helmet. To adjust, lift
and reposition the control
arm to the desired position.
3
4 Distance Adjustment
5 Headgear Screw
Adjusts the distance be-
tween the face and the
lens. To adjust, loosen
headgear screws and slide
headgear forward or back-
ward to one of the three
slots on the slider. Tighten
screws. (Both sides must
be equally positioned for
proper vision.)
OM-281996 Page 9