Casio PX-410R Supplementary Manual page 51
Midi implementation
Hide thumbs
Also See for PX-410R:
- User manual (100 pages) ,
- Service manual (34 pages) ,
- Appendix (8 pages)
Table of Contents
Advertisement
Note 3:
Selects the Master EQ low-range gain. See "43.15 Equalizer Gain Setting Value Table".
Note 4:
Selects the Master EQ mid-low frequency. See "43.13 Equalizer Mid Frequency Setting Value Table".
Note 5:
Selects the Master EQ mid-low-range gain. See "43.15 Equalizer Gain Setting Value Table".
Note 6:
Selects the Master EQ mid-high frequency type. See "43.13 Equalizer Mid Frequency Setting Value Table".
Note 7:
Selects the Master EQ mid-high range gain. See "43.15 Equalizer Gain Setting Value Table".
Note 8:
Selects the Master EQ high-range cutoff frequency. See "43.14 Equalizer High Frequency Setting Value Table".
Note 9:
Selects the Master EQ high-range gain. See "43.15 Equalizer Gain Setting Value Table".
DSP Patch Parameter
The values of this parameter do not change when DSP Type and Tone Values are changed.
ParamID Parameter
2C
DSP Type Number (Note 1)
2D
DSP Hold
2E
DSP Level
2F
DSP Pan (Note 2)
Note 1:
Selects the DSP Type. Receipt of GM/GS Reset selects 014 Delay. 200 is stored when a tone-associated DSP is read into
the DSP area.
Note 2:
See "43.6 Pan Setting Value Table".
DSP Type parameter
The value of this block's parameter is rewritten whenever the DSP type or tone is changed.
ParamID Parameter
30
DSP Name A (Note 1)
31
DSP Name B (Note 1)
32r
DSP Algorithm ID (Note 2)
33
DSP Chorus Send
34
DSP Reverb Send
Note 1:
These parameters change the DSP name. One character is indicated by each byte.
Note 2:
This value is the DSP algorithm ID, which cannot be changed directly. Changing the DSP type or tone number causes the
algorithm ID of the original DSP to be copied automatically to this parameter. See "43.16 DSP Algorithm ID Table".
bit
Value
08
00-C8
01
0-1
07
00-7F
07
00-7F
bit
Value
20
0-FFFFFFFF
20
0-FFFFFFFF
07
00-3F
07
00-7F
07
00-7F
51
Default Setting Value (Decimal)
0E
0- 99 Preset
100-199 User
200 DSP of Tone
0
0...Off
1...On
64
0-127
40
-64 to 0 to +63
Default
Setting Value (Decimal)
556e7469 MSB is leading character.
746c6564 MSB is leading character.
00
0-63
40
0-127
40
0-127
Hide quick links:
Advertisement
Table of Contents
