Recording Your Practice (Song Recording; Recording A Performance (Free Recording - Casio Celviano AP-80R User Manual

Recording Your Practice
(Song Recording)
You can use the procedure below to record your play during
practice with one of the digital piano's built-in tunes.
You can specify which parts you want to practice, and the keyboard
plays the remaining parts as accompaniment.
Getting Ready
• Press the SONG/USER button or PIANO button to select the
mode that contains the tune you want to use for recording.
Press the SONG MEMORY button to enter record
1
standby.
• This causes the SONG MEMORY button indicator lamp
to flash.
Select the tune you want to use for recording.
2
Use the TRACK button to select the part you want to
3
record.
Configure the following settings as required.
4
• Tone (page E-6)
• Tempo (page E-17)
Press the START/STOP button to start recording.
5
Play the required notes on the keyboard.
6
To stop recording, press the START/STOP button again.
7
• This will stop the recording operation.
* If you want to immediately hear what you recorded,
press the START/STOP button again.
Song Recording Data
In addition to your keyboard play and chord accompaniment, the
following data is also stored by a song recording operation.
• Tone setting
• Tempo setting
• Tune name
• Recording part
• Pedal operations
• Layer and split settings
• Reverb and chorus settings
Playing Back a Song Recording
Getting Ready
• Press the SONG MEMORY button to enter playback standby.
Press the START/STOP button.
1
• This starts playback of Song Memory contents.
• Use the TEMPO buttons to adjust the tempo.
To stop playback, press the START/STOP button again.
2
429A-E-025A
AP80R_e_17-28.p65 23
Recording Your Keyboard Play
Recording a Performance
(Free Recording)
Use this procedure when you want to record accompaniments and
keyboard play in real time.
Getting Ready
• Press the RHYTHM button to enter the rhythm mode.
Press the SONG MEMORY button to enter record
1
standby.
• This causes the SONG MEMORY button indicator lamp
to flash.
Use the TRACK button to select Track 1.
2
Flashing
Configure the following settings as required.
3
• Tone (page E-6)
• Rhythm (page E-10)
• Accompaniment mode (page E-11)
* Use a slower tempo if you feel you might have trouble
playing properly at a faster tempo (page E-17).
Press the START/STOP button.
4
• This starts recording.
Play the required notes on the keyboard.
5
• Any chords you play on the keyboard are recorded, along
with their Auto Accompaniment patterns. Melody notes
you play are also recorded.
• Any pedal operations you perform while playing are also
recorded.
To stop recording, press the START/STOP button again.
6
* If you make a mistake, you need to go back and
re-record from step 1.
* If you want to immediately hear what you recorded,
press the START/STOP button again.
NOTE
• Recording a performance to a track that already contains data
causes the existing data to be replaced by your new
performance.
04.8.26, 3:44 PM
E-23