Table of Contents
Advertisement
Quick Links
Esprit Tech
P.O. Box 360815
Melbourne, FL
32936, USA
F
EATURES
The Voltario T60 is a high performance digital dual battery backer with advanced telemetry features. It contains a
charging circuit and touch switch functionality. The device is ideal for mid-size models where high-voltage servos are
used without voltage stabilization.
Voltario T60 is suitable for models equipped either with dual receiver batteries, or with ESC battery eliminator
circuit (BEC) used as a primary power source, combined with a small backup battery. The device prefers its primary
battery input, while in case of voltage drop it automatically switches to the secondary input. The charging circuit may
be optionally enabled to charge the secondary battery from the primary input/BEC.
Voltario T60 is designed to turn on/off the electronics in your model, it can replace a mechanical switch as well. The
device remembers its last operating state, and if the battery is accidentally disconnected, the Voltario will
automatically boot up again as soon as the battery is connected again.
Intelligent dual battery backer/multiplexer with configurable voltage switchover threshold.
Touch Switch function.
Duplex EX, Futaba S.Bus2, Multiplex MSB, Graupner Hott telemetry support (current, voltage, capacity of both
battery inputs).
Optional charging of the secondary battery.
Remembers the last operating state.
Dimensions
Weight incl. cables
Cables
Connectors
Continuous current
Peak current (2s)
Standby current
Operating current
Charging current for Batt.2
Operating temperature
Supply Voltage
Recommended Supply Voltage
Telemetry
Touch switch support
BEC
Selectable touch / mechanical switch/ RC switch
Status LED´s
I
NSTALLATION
Plug the device between receiver and a primary battery/BEC. Connect the secondary battery to the B2 input.
Dual battery installation (without BEC):
T60-JR
T60-C
Date:
11.12.2020
Version: 1.03
U
M
SER
ANUAL
Voltario T60-C
36x19x6mm
1mm
Duplex EX, Multiplex MSB, Graupner Hott, Futaba S.Bus2
1
Support@EspritTech.com
https://www.EspritTech.com
23g
(17AWG)
2
-
15A
30A
50 µA
40mA
up to 200mA
-20 to 85°C
4 – 12.6V
5-8.4V
Yes
No
Yes
Yes
(1) 321.729.4287
Voltario T60 JR
36x19x6mm
17g
0.5mm
(20AWG)
2
Standard JR
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Elite Voltario T60
Summary of Contents for Elite Voltario T60
- Page 1 Voltario T60 is designed to turn on/off the electronics in your model, it can replace a mechanical switch as well. The device remembers its last operating state, and if the battery is accidentally disconnected, the Voltario will automatically boot up again as soon as the battery is connected again.
- Page 2 ATTERY BACKUP FUNCTION The Voltario T60 generally uses its primary battery input B1 as a main power source. If the B1 voltage drops below the configured Voltage threshold value, it can switch to the B2 input. In such case the source with higher voltage will be used.
- Page 3 OUCH SWITCH Installation inside the fuselage. Installation on top of the fuselage. Touch switch behavior Place the touch button anywhere on your model on the surface made of nonconductive material. You can place the touch button also inside the fuselage with maximum thickness up to 3mm. ...
- Page 4 Charging – you can enable the charging function for 2SLi-Ion/Li-Pol or 2S LiFe secondary battery (B2). Service – In this menu you can view the device version and reset it to the default factory configuration. JETIBOX menu structure Graupner Hott Menu Structure The Voltario T60 offers telemetry as an “Electric Air Module”.
- Page 5 IRMWARE PDATE Firmware updates for the Voltario T60 are transferred from a PC via the USB interface. The required programs and files are available at www.esprittech.com Install the MAV Manager software and the USB drivers on your computer. Check the system requirements.
Need help?
Do you have a question about the Voltario T60 and is the answer not in the manual?
Questions and answers