Fast Facts User Guide - Vega 3000 Countertop
Installing the Terminal
•
Plug the
power
supply
port
labelled
9V.
•
Plug the
Violet
colour Ethernet cable into a spare port on
your Broadband router or network point and then into
the back of the terminal in the port labelled LAN.
•
Ensure both the power and Ethernet cables are secured
under the protective/cable tidy clip.
•
Turn the terminal on by pressing the power button on the
bottom left hand corner/ under the number 7.
•
If prompted, enter the Merchant ID (MID) received from
the Payments Alliance.
•
The terminal will now complete a short
will be ready for use.
Your
ID
Note:
Merchant
to you via
email
from The Payments Alliance.
It is
important
that you change your Manager Passcode to a
memorable number and keep it safe.
To
change
the
Manager Passcode:
•
From
the
idle
screen, press the red key to enter the
System Menu
•
Enter the Manager Passcode provided to you in your
Welcome Email and press OK.
•
Scroll down using the# Key to
press OK.
•
Erase the existing
passcode
•
Now enter your chosen
•
NOTE:
Please
keep
your
Contactless Transactions
•
From the
idle
screen, key in the transaction amount and
press OK (green key).
•
The t
erminal
will
display the contactless symbol
•
Ask
the
customer to present their
device to the terminal
when it has read the card or
•
The card terminal will then request an authorisation and
complete
the
transaction.
into
the back of the terminal in the
installation
and
will be sent
Manager Passcode
'Change passcode
using the yellow arrow Key.
New passcode.
New passcode
SAFE.
contactless
card or
screen.
The
Terminal will BEEP
device.
and
and
'
•
The
terminal will
which is the merchant (your) copy.
•
If the customer requires a receipt, press the OK key to
print a Cardholder
•
If the customer does not require a receipt, press the Red
C">i
!
Key to
only automatically print one receipt,
receipt.
return
to the idle screen.