Advertisement
1b. Solid Brick and Concrete Mounting
D8 Washer
Concrete Anchor
Anchor Bolt
• When installing wall mounts on cinder block, verify the actual concrete thickness
is at least 1-3/8" (35mm) for using the concrete anchors. Do not drill into mortar
joints! Be sure to mount in a solid part of the block, generally 1" (25mm) minimum
from the side of the block. It is suggested an electric drill on a slow setting be used
to drill the hole instead of a hammer drill to avoid breaking out the back of the hole
when entering a void or cavity.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
14-10-274-9333F1.indd 5
WARNING
5
90mm
(3.5")
ø12.5mm
(ø1/2")
1
exact location of
mounting holes
2
Drill pilot holes
Screw the wall
plate onto the
wall
11/11/2014 9:54:22 AM
Mark the
Advertisement
