Product Functions And Specifications; The Names Of Each Part - LG BECON PEXPMB000 Installation Manual

PRODUCT FUNCTIONS AND SPECIFICATIONS

6
PRODUCT FUNCTIONS AND SPECIFICATIONS
The ACS IO is a module that can be connected with the ACS IV Controller (AC Smart IV, and ACP
IV) for scalability in case the ACS IV Controller does not have enough DI, DO ports, or in case one
wants to use an AI, AO port.

The names of each part

The ACS IO consists of the following types.
Input/output status LED
RUN LED
485 LED(Tx/Rx)
Power source LED
Input/output status LED
AO Port (control signal interconnect)
UI Port (control signal interconnect)
Expansion connector (Not used)
! CAUTION
When expanding on the product using a connecting product, check the shape of the expan-
sion connector head before attempting to connecting the cord.
Connecting the wrong cord can results in damage and a malfunction of the product.
1
AO1 AO2 AO3 AO4
ACS IO Module
DO1 DO2 DO3 DI1 DI2 DI3
4 5
DO Port (control signal interconnect)
DI Port (control signal interconnect)
RS-485 Communication unit
24 V~ Power input port
Dip Switch (Not used)
Rotary Switch (ACS IO address creation)
2
UI1 UI2 UI3 UI4
9
3
Address creation switch
6 7 8
Expansion connector