Advertisement
The surface of the product tends to become hot during use.
- Unplug the plug from the socket when the product is not in use
and before cleaning. Clean it after the temperature drops to room
temperature.
- Do not operate when the power cord or plug is damaged, the
product is malfunctioning, or the product is damaged in any way.
Please consult the salesperson of the retail store where you
purchased the product for relevant advice.
- Do not allow wires to hang on the product surface or contact hot
surfaces.
- Do not place this product on or near hot gas or electric burner, or
in heating furnace.
- Be sure to connect the plug to the power cord.
- To disconnect the power, pull the plug from the wall socket.
- Do not disconnect the power source by pulling the power cord.
Hold the plug and pull it out.
- Do not immerse the product, power cord or plug in water.
- This product is equipped with a short-circuit power cord to reduce
the risk of tripping.
- Do not put items wrapped in aluminum foil into the oven.
- Before putting the bread in the oven, remove all protective packaging.
- If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similar personnel to avoid danger.
- Do not use this product in a bathtub or sink or any container that
contains water or liquid.
- If the product falls into water, do not touch the product. Before
taking it out, disconnect the power supply and drain the water.
Do not use the product again until it is checked by a qualified
service agent.
- The back surface of the product should be placed close to the wall.
- For detailed information on how to clean food-contact surfaces,
please refer to the "Cleaning" section.
4
Advertisement
