Grounding Instructions; Specifications; Cleaning And Maintenance - Ventamatic Hetr H1500 Owner's Manual

This heater is for use on 120 volts. The cord has a plug as shown at A in figure. An
adapter as shown at C is available for connecting three-blade grounding-type plugs to
two-slot receptacles. The green grounding lug extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box. The adapter
should not be used if a three-slot grounded receptacle is available.
GROUNDING PIN
Model Number
Power Supply
Power Consumption (Wattage)

CLEANING AND MAINTENANCE

Before any cleaning, make sure that:
1. Power the unit OFF and unplug. Wait until it has completely cooled down.
2. Disconnect power supply at source by removing plug from power outlet.
3. Your heater is now ready for cleaning.
4. Do not use cleaning liquid or other chemicals to spray on the unit.
Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728

Grounding Instructions

METAL SCREW
ADAPTER
GROUNDING
GROUNDING
MEANS
PIN

SPECIFICATIONS

H1500
HQ1500
120 volts AC, 60Hz
25W- Lamp only
1500W- Lamp and Quartz heating element ON
COVER OF GROUNDED
OUTLET BOX
9
1-800-433-1626 Fax: 940.325.9311 www.BVC.com
8