Supplied Contents; System Requirements; Brief Description And Characteristics - RME Audio DIGI32 PRO User Manual

2. Supplied Contents

Please ensure that all the following parts are included in DIGI32 PRO's packaging box:
• PCI Card DIGI32 PRO
• Short Info
• RME Driver CD
• Adapter cable (XLR/cinch)
• Internal cable (2 wire)

3. System requirements

• Windows 95 ™ ™ ™
/ NT or MacOS
• A free PCI bus slot
• An unused IRQ
Additional system requirements such as CPU, memory etc. depend on the software used for
recording, playing and editing the audio data.

4. Brief Description and Characteristics

• Short, full Plug & Play compatible PCI card
• 16 / 20 / 24 bit audio resolution
• System integration with Windows' Device Manager
• Display of the input sample frequency
• 4 inputs switchable during operation
• Outputs optical/cinch/XLR work simultaneous (signal distribution possible)
• Accepts Professional and Consumer Format, ignores copy protection
• Low impedance analog output with high quality 20 bit / 96 kHz DAC
• Error LED for input signal
• Low Jitter Design: < 1 ns in PLL mode (44,1 kHz, optical In)
• Sample aligned simultaneous start of record and playback in Record while Play mode
• High sensitive input stage (< 0,15 Vss input level)
• Ground free transformer coupled inputs and outputs
• No DMA or input / output address needed
• Full Duplex (simultaneous recording and playback)
• Driver for Windows 95
™ ™ ™
, Windows NT and MacOS
• Works with every usual recording or editing software
• Various pass through modes for input signal to analog and digital out
• High bus transfer rate (> 120 MByte/s) ensures minimal CPU / system load
• More than one card with only one driver useable (Windows)
• Automatic hardware self-test when booting
User's Guide DIGI32 PRO © RME
3