Entering A Number - Canon FaxPhone B150 User Manual

5
After selecting or entering a value, press
[START/COPY].
6
Repeat steps 4 and 5 as needed.
7
When the operation is complete, press [STOP].
Registration ends and the fax returns to standby
mode.
After 60 seconds of no operation panel input, the fax returns to standby
mode and any unregistered changes are lost.

Entering a number ______________________________

Whenever you are prompted to enter a fax number or a telephone number, follow
these procedures.
Use the numeric buttons to enter the number.
TEL=
You can enter up to 20 digits for your fax number or 50 digits for a speed dialling
number.
Be sure to enter 1 and the area code, if necessary, to dial a different area code.
Do not enter dashes, slashes, commas, or other punctuation.
Use the One-touch Speed Dialling buttons as follows:
To enter a space between numbers, press [SPACE].
If you make a mistake, press [CLEAR] and enter the number
again.
To erase a previously registered number, press [CLEAR].
You can also enter a new number over the old one.
If you need to enter a pause for any reason,
Press [REDIAL/PAUSE] at the desired point in the sequence when entering a series
of digits.
A pause within a number is 2 seconds long*. The length of this pause can be
adjusted. See MID PAUSE SET in TX SETTINGS, p. 85. A pause at the end of a
number is fixed at 10 seconds.
*4 seconds long in the UK and Hong Kong.
Registering your name and number
START/COPY
DATA ENTRY OK
STOP
SEND OPTIONS REPORT CLEANING
01 03
02
SPACE CLEAR TONE
06
07 08
2
R
04 05
D.T.
09
10
29