Advertisement
Quick Links
MITSUBISHI MOTORS
GENUINE ACCESSORIES
PART NUMBER
APPLICABLE MODEL
MZ380465EX
OUTLANDER
INSTALLATION MANUAL
REAR PARKING ASSIST SENSORS
Thank you for purchasing MITSUBISHI genuine * PARKING SENSOR SYSTEM *. This manual ex-
plains the procedure for installing * PARKING SENSOR SYSTEM *. Read this manual thoroughly
before installation to ensure proper work.
BILL OF MATERIALS:
#1 Wire Harness: 1
#2 Wire Harness: 1 #3 Wire Harness: 1
#4. Foam Pad: 9
#5. Module: 1
#7. 26mm Paster: 2
#8. 24mm Paster: 2
#6. Sensors: 4
#9. Buzzer: 1
#10. Sensor Clips: 4
#11. Tie Wraps: 20
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mitsubishi MOTORS MZ380465EX
Summary of Contents for Mitsubishi MOTORS MZ380465EX
- Page 1 MITSUBISHI MOTORS GENUINE ACCESSORIES PART NUMBER APPLICABLE MODEL MZ380465EX OUTLANDER INSTALLATION MANUAL REAR PARKING ASSIST SENSORS Thank you for purchasing MITSUBISHI genuine * PARKING SENSOR SYSTEM *. This manual ex- plains the procedure for installing * PARKING SENSOR SYSTEM *. Read this manual thoroughly before installation to ensure proper work.
- Page 2 TOOLS 24mm 15mm 26mm 10mm...
-
Page 3: Before Installation
BEFORE INSTALLATION: Disconnect NEGATIVE terminal... - Page 4 Repeat RH Side...
- Page 6 #8. 24mm #7. 26mm #7. 26mm #8. 24mm...
- Page 9 24mm 24mm 26mm 24mm / 26mm...
- Page 10 #3. Harness #6. Sensors #6. Sensor #6. Sensor #10. #10.
- Page 11 #2. Harness 220mm #1. Harness...
- Page 12 #2. Harness LINE COLOR 1- None 2 -White/Black line 3 - Orange / Black Llne 4 - Blue / White line 5 - Red / White line 6 - Yellow / Green Line 2 3 4 5 6 #1. Harness #2.
- Page 13 42 B 42 A #1. Harness #2. Harness CAUTION: Use 42 C 42 A & B thick white wire! #1. Harness...
- Page 14 155mm 155mm 15mm 15mm 55 mm 55mm 47 A...
- Page 15 # 11 TEST...
- Page 16 Function inspection- Troubleshooting Symptom Possible Cause Confirmation Method Solution When the gear is The buzzer plug has not Confirm whether the Insert the buzzer plug shifted to “R”, the alert been inserted. buzzer plug is inserted. correctly. does not beep. Tail light power wire Check if reverse lights Splice the thick white...
- Page 17 The gear is in “R” but One of the sensors is Confirm whether each Replace any damaged the warning does not damaged. sensor functions sensor with a new one. go off although there properly. are objects behind the The objects are outside Refer to the service (The warning does not vehicle.
-
Page 18: Product Specification
Product specification Items Specification Items Specification Rated Voltage DC 12.0V Rated Voltage DC 12.0V Operation Voltage DC 9.6V~ 16V Operation Voltage DC 9.6V~ 16V Operation Temp -20 ~ 70 Operation Temp -20 ~ 70 Storage Temp -30 ~ 80 Storage Temp -30 ~ 80...
Need help?
Do you have a question about the MZ380465EX and is the answer not in the manual?
Questions and answers