Appliance Description - Beem Vital-Grill & Sandwich 2 in 1 User Manual

EN
Electrical connection
For safe and trouble-free operation of the
appliance, the following instructions on
the electrical connection must be be ob-
served:
■ Before connecting the appliance,
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. The
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
■ The mains socket must be protected
by at least a 10 A automatic circuit
breaker.
■ Ensure that the mains cable is undam-
aged and is not laid over sharp edges.
■ The mains cable must not be pulled
tightly, bent or come into contact with
hot surfaces.
■ Route the mains cable to prevent risk
of tripping.
■ If the appliance is to be connected
to the power supply via an extension
lead, the cable cross-section must be
at least 1.5 mm².
■ The electrical safety of the appliance
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
BEEM - Elements of Lifestyle
Vital-Grill & Sandwich 2 in 1

Appliance description

(see illustration on the left fold-out)
1 Indicator light
2 Cleaning spatula
3 Drip tray
4 Warming compartment
5 Grill plates
6 Stand with 3 mm rubber feet (11 mm
rubber stoppers, not illustrated)
7 User manual (not illustrated)
Switching the appliance on/off
Insert the plug into the mains socket
‹
to switch on the appliance.
NOTE
► The grill plates (5) have a ceramic
non-stick coating. It prevents food
from sticking. It is also resistant to
scratching, high temperatures, can
be cleaned easily and is environ-
ment friendly.
17