IBASE Technology IB905 User Manual page 42

BIOS SETUP
LCD Control
Main Advanced
LCD Control
Primary IGFX Boot Display
LCD Panel Type
SDVO-LFP Panel Type
Panel Color Depth
LVDS BLON Control
Panel Scaling
Spread Spectrum clock Chip
TV1 Standard
TV2 Standard
ALS Support
Active LFP
Primary IGFX Boot Display
Select the Video Device that will be activated during PoST. This has no
effect if external graphics present.
Secondary boot display selection will appear based on your selection.
VGA modes will be supported only on primary display.
Active LFP
Select the Active LFP Configuration.
No LVDS: VBIOS does not enable LVDS.
Int-LVDS: VBIOS enables LVDS driver by Integrated encoder.
SDVO LVDS: VBIOS enables LVDS driver by SDVO encoder.
eDP Port-A: LFP Driven by Int-DisplayPort encoder from Port-A.
Panel Color Depth
Select the LFP Panel Color Depth: 18 Bit, 24 Bit.
LVDS BLON Control
Select the LFP Panel Inverted voltage: 3.3V, 5V.
LCD Panel Type
Select LCD panel used by Internal Graphics Device by selecting the
appropriate setup item: 640x480 LVDS ~ 2048x1536 LVDS.
SDVO-LFP Panel Type
Select SDVO panel used by Internal Graphics Device by selecting the
appropriate setup item: VBIOS Default, 1024x768 ~ 1600x1200.
38
Aptio Setup Utility
Chipset
Boot
VBIOS Default
VBIOS Default
VBIOS Default
18 Bit
[3.3V]
Auto
Off
VBIOS Default
VBIOS Default
Enabled
No LVDS
IB905 User's Manual
Security Save & Exit
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & Exit
ESC: Exit